Malfunctions and solutions (the machinery part) -1
Motor of main gear does not work when switching on
Reasons | Solutions |
1. Park in a wrong position | Turn the main shaft to 100 degree |
2. Embroidery frame shut down offside | Move the frame inversely |
3. Machine is jammed | Find out the jammed point and fix it |
4. Motor of the main gear is switched off | Turn it on |
5. Related fuse blows | Replace it |
Designs are out of shape
Troubles | Solutions |
1. Embroidery frame is too heavy | Reduce the weight |
2.The tothed belt is too tight or too loose | Adjust the tension of it |
3. Fraction in the track is too strong, maybe with unknown objects | Clean and add lubricant oil to it |
4. Connection between the transmission shaft and the belt becomes loose | Check the stopping screw and fixing bolt，and tighten them |
5. The driving bearing breaks down | Replace the bearing |
6. The fraction between the embroidery frame and the board is too strong | Check whether embroidery frame is out of shape, the screw of the frame is too loose or not, and the screw of the embroidery aid frame is too long |
7. Embroidery frame is too loose or too tight | Check the bearing of embroidery frame |
8. Connection between the pulse motor and the connecting cover is loose, so is the bolt | Fasten them |
9. Embroidered material is too loose | Add slip sheets, and retighten them |
10. Data is changed because of outside interruption | Reinput designs |
11. Electric appliances reasons | Refer to book of direction |
